© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021690/10/20/short
Phone +49 551 79001-0 · Fax +49 551 79001-65 · [email protected] ·
Page 3 of 16
1
Introduction
Thies “short manual” describes the installation and startup of the “ClimaSensorUS” by means
of the PC-program “ThiesDeviceUtility”.
Article- No.
Description
Parameter, output, interface, equipment,
etc.
4.920x.x0.xxx
CLIMA SENSOR US
The description of the products can be
found in the complete manual.
Scope of Delivery:
1 x CLIMA SENSOR US.
1 x Supplementary sheet with the factory settings.
1 x Short Manual (the complete manual available for download).
For assisting the parameter settings and/or special configurations there is our cost-free
“Device Utility Tool” art.-no. 9.1700.81.000 as well as the complete manual available for
download on our homepage. Please download the tool with following link.
https://www.thiesclima.com/de/Download/
In section "General", the program "Thies Device Utility" is the program available for
download.
In section „Weather station“ is the complete manual available for download.
Please check the completeness of delivery.
For an initial start-up, we recommend to use a PC, the power supply unit 9.3389.20.000, the
connecting cable 509427 or 509311, and the interface converter 9.1702.40.002. For
connection diagrams for wiring please refer to
chapter
2
Installation
Attention:
The working position of the CLIMA SENSOR US is vertical (plug connection
underneath).
During mounting, de-mounting, transport or maintenance of the CLIMA
SENSOR US please make sure that no water gets into the instrument base or
plug.
The instrument must be mounted and wired only by qualified personnel, who
knows and observes the generalities of techniques, and applicable
regulations and norms.
