B10361-B
4
EN-161118
Tags for Quality Grade 10 (Special Type, Blue Color),
Example
:
Manufacturer’s sign
CE symbol
Number of legs
Next inspection
Nominal chain Ø
WLL at max. inclination angle
Front side
Rear side
9
Inspections, Maintenance, Disposal
Inspections and maintenance must be arranged for by the Owner!
Inspection intervals shall be determined by the Owner!
Inspections must be carried out and documented by competent persons
regularly but at least once a year, or more frequently if the master link
assemblies are in heavy-duty service. After three years at the latest they must
additionally be examined for cracks. A load test shall never be considered a
substitute for this examination.
The results of the inspection shall be entered into a register (DGUV I 209-062
or DGUV I 209-063) to be prepared when the sling chain assembly is first
used. The register will show characteristic data of the chains and components
as well as identity details.
Immediately stop using sling chain assemblies that show the following defects:
missing or illegible identification/marking,
deformation, elongation or fractures of chains or components,
cuts, notches, cracks, incipient cracks, pinching,
parts heated beyond permissible limits,
severe corrosion,
reduction of the averaged link thickness by more than 10 % as mean value
of measurements taken perpendicularly towards each other,
missing or damaged dowel pins.
Inspection Service
THIELE offers inspection, maintenance and repair services by trained and
competent personnel.
Maintenance and Repair
Maintenance and repair work must only be performed by competent persons.
Minor notches and cracks may be eliminated by careful grinding observing the
maximum cross section reduction requirement of 10 % and avoid making more
severe cuts or scores.
Welded sling chain assemblies must exclusively repaired by the manufacturer.
All maintenance and repair activities are to be documented.
Disposal
All components and accessories of steel taken out of service are to be
scrapped in line with local regulations and provisions.
10 Spare Parts
Only use original spare parts.
Spare Parts Sets for Clevis-type Fastening System
Consisting of pin and dowel pin
Nominal
size
Article-no.
Set
Nominal
size
Article-no.
Set
6-8
F48694
6-10
F48686
8-8
F48352
8-10
F48687
10-8
F48355
10-10
F48688
13-8
F48358
13-10
F48689
16-8
F48361
16-10
F48690
18-8
F48364
22-8
F48367
Article Numbers for Tags
Grade Article-no.
Execution
8
F08040
without welded ring
F08042
with welded ring
10
F08052
without welded ring
F08053
with welded ring
11 Storage
Make sure sling chain components are stored in dry locations at temperatures
ranging between 0 °C and +40 °C.
12 THIELE Operating and Mounting Instructions
Current operating and installation instructions are available as a PDF
download on the homepage.
13 Publishing Information
THIELE GmbH & Co. KG, Werkstraße 3, 58640 Iserlohn, Germany
Tel.: +49(0)2371/947-0 // Email: [email protected]
© THIELE GmbH & Co. KG, 2018. All rights reserved.
‘#’ Changes to previous edition.