Thiel USS SmartSub Owner'S Information Download Page 8

Fuse Replacement

Specifications

If the subwoofer is completely dead, with no indicator 

light on, the main fuse has probably blown and will need 

to be replaced. The fuse should be replaced only with an 

equivalent type. The fuse type is 5 x 20 mm size, slo-blow 

or time delay type, with a rating of 5 amp for 230 volt units 

and 8 amp for 115 volt units. Fuse reference numbers are 

T5AL or T8AL. Or, contact THIEL for a replacement fuse.
Replace the fuse by first unplugging the power cord from 

the subwoofer. Unscrew the 10 hex-head retaining screws 

using a 9/64” wrench, and then remove the amplifier panel 

from enclosure. Remove the fuse from the socket located 

as pictured. Replace with specified value, then replace the 

amplifier panel into the enclosure. 

Amplifier 

Power output (at 120 or 240 line voltage)  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  550 watts RMS

 

Line voltage   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .90-130 or 180-260

Cabinet 

Response.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   Normal input: 20 Hz–300 Hz, ±0.5 dB;  LFE input  20 Hz–300 Hz, ±0.5 dB

 

Bandwidth   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  Normal input  20-800 Hz, ±3 dB;  LFE input: 20–800 Hz, ±3 dB  

 

Sensitivity.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .1 volt for 120 dB @ 1 m, 4

π

 

Size (inches height, width, depth)  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 20, 10

½

, 15

 

Weight (pounds)  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  57

 

Driver .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 10”

 

Driver displacement (cu in) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  65

 

Output dB @ 20Hz / 30Hz (corner placement) .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  99 / 106

THIEL 

• 1026 Nandino Boulevard, Lexington, Kentucky 40511-1207

Telephone: 859-254-9427 • E-mail: [email protected] • Web: www.thielaudio.com

0412

Register your warranty online at 

www.thielaudio.com

Warranty

THIEL warrants every THIEL SmartSub system against defects in materials and workmanship to the original owner for a period 

of ten years for the drivers and cabinet, and five years for the electronics from the date of purchase. THIEL will, at no charge, 

replace any defective part and make any repairs necessary to ensure its proper performance when the defective unit is returned to 

us postpaid.  
This warranty does not cover damage due to accident or abuse and is void if the unit has been tampered with.
This warranty is automatic and no registration is required.  This warranty gives you specific legal rights.  You may also have other 

rights which are particular to your state.

The following information is for your records.
 

Serial Numbers______________________________      

Purchase Date_______________________________

 

Purchased From_____________________________

Summary of Contents for USS SmartSub









Reviews: