Tecma Compass High PREMIUM Owner’s & Installation
31
www.thetfordmarine.com
Wiring Information for Tecma Compass
Pin Contact: 0460-204-08141
Receptacle: DTHD04-1-8P
F
27139 (AMP)
Q
Columbo 27131 (Installed)
B
Parts included in Wiring ConnectionKit
A
Socket Contact: 0462-203-08141
Plug Housing: DTHD06-1-8S
G
Solenoid Valve
non-water proof connection
Water Pump
non-water proof connection
Customer Supplied Wiring Parts
Customer Supplied Wiring Parts
Black
14 AWG Black (Recommended)
Black
14 AWG Blue
14 AWG Blue (Recommended)
Blue
Black (Recommended)
Black
Red (Recommended)
Red
See Wiring Information chart for correct wire
gauge and circuit breaker sizes
Solenoid Valve
Water Pump
Tecma Compass Controller
Tecma Compass Controller
Tecma Compass Controller
G
B
A
F
G
Q
{
Apply dielectric grease to wire terminals before termi-
nals are installed in housings. Grease is included in
the wiring connection kit.
Plus Tank Sensor Wiring
Customer Supplied Wiring Parts
Black
Black
Brown
Black
Brown
White
16 AWG White
(recommended)
16 AWG Black
(recommended)
Red
Green
16 AWG Green
(recommended)
16 AWG Red (recommended)
Tecma Compass Controller
C
C
D
D
D
D
C
C
Full Tank Sensor
Optional Mid-tank
Sensor
Socket Contact: 0462-201-16141
Plug: DT06-2S
Wedge Lock: W2S
C
Pins: 0460-202-16141
Receptacle: DT04-2P
Wedge Lock: W2P
D
Warning!
Water Pumps must be powered by toilet controller as shown above. Do not wire pump directly to a power source so that it is controlled by
its pressure-activated switch. If a leak were to occur when wired directly, the pump would run continuously and create the risk of sinking the boat and loss of
life.
CAUTION!
Dielectric Grease is a possible eye irritant. If contact occurs, rinse eyes with water for 15 minutes. Keep out of reach of children.
Power wiring
10 AWG
