Thetford 162 series, User And Installation Instructions Manual

Page: 11 / 15

INTRODUCTION
In your own interest of safety, gas appliances should be installed by competent persons. Failure
to install the appliance correctly could invalidate any warranty or liability claims. This appliance
shall be installed in accordance with the manufacturer’s installation instructions, local gas fitting
regulations, municipal building codes, AG5601 and any other relevant statutory regulations.
Data Label
The data label is located on the underside of the control panel area towards the front of the
appliance. A duplicate data label is supplied to adhere to an accessible area next to the
appliance. This appliance is designed for use with Propane Gas only and should not be
converted for use with any other gas.
Provision of Ventilation
The use of a gas cooking appliance results in a production of heat and moisture in a room in
which it is installed. Ensure that the kitchen is well ventilated and in accordance with AG5601
Installation Code. In general, the appliance should have adequate ventilation for complete
combustion of gas, proper flueing and to maintain temperature of immediate surroundings within
safe limits.
Location
Chose a location free of draughts away from open doors and clear of combustible materials or
other fire hazards. The location should ensure convenience of operation and service. Any
adjoining wall surface situated within 200mm from the edge of any hob burner must have a
suitable non-combustible material for a height of 150mm for the entire length of the hotplate.
Any combustible construction above the hotplate must be at least 600mm above the top of the
burner and no construction shall be within 450mm above the top of the burner
•
This appliance is designed for use with Propane Gas and should not be
converted for use with any other gas
•
Use only the Gas Pressures specified
•
This appliance MUST be earthed
11