This screen allows the user to set the
value of Output 1
Start
,
Pressing “ Up” key will confirm
the present value as
Start
value
and advance to the selection of
Elbow value of output 1 if elbow
Pressing the “ Down” key will
enter the “
o
utput 1
Start
value
3.1.9.1.2: Start value of output 1
(considerd as DC Current).Start value of output 1 can be set upto
edit” mode.
Otherwise goes to output 2 characteristics selection(section 3.1.9.2)
20 % of end value of output &
m
inimum Start value setting
depends upon transducer type.
For Apparent transducer range of
For active/reactive/power factor/phase angle transducer range of
Start value setting can be done is -100% to 20% of End value.
Editing Existing
Start
value
Pressing the “ Down” key will
not affect the first digit It always
Pressing the “ Up” key will
advance the operation to the next
(*Denotes that digit will be flashing).
*
remains 0.
digit and set the first digit, in every case to “0”.
Start value setting can be done is 0 to 20% of End value.
function of input is enabled (section 3.1.9.1.3)
33
Summary of Contents for 30P
Page 2: ......
Page 60: ...Inductive Capacitive Capacitive Inductive Diagram Phaser 60 ...
