8
Now place the heating scarf on your shoulders. Pull the left
part into the right part. Fasten the buttons behind the right
part.
•
Pull the cable from the battery bag. Connect the cable to
the battery.
•
Place the battery in the battery bag.
•
Press the on / off switch for approx. 2 seconds to switch on the heating function.
Then press the On / Off button briefly (repeatedly if necessary) to set the desired
temperature level (level 1-2-3, red -green -blue).
The 1st level is the warmest level, the LED display lights up red.
The 2nd level is the middle level, the LED display lights up green.
The 3rd level is the lower level, the LED display lights up blue.
•
The four T-LED shows the remaining capacity of the battery.
•
After 30 seconds, the power button will go into power-saving mode and the LED
indicator will darken, but the heating function will continue. If you desire a
different temperature level during use, briefly press the power button again to
unlock it from power-saving mode. You can then set your desired level as
described above.
•
Press the on / off switch for approx. 2 seconds to switch off the heating function.
** Stop using it if you see redness on your skin. Excessive heat can cause burns!
5. Cleaning and maintenance
•
Before cleaning, disconnect the heating scarf from the battery or power supply.
•
Never use aggressive cleaning agents or strong brushes.
•
The heating scarf can be washed in the washing machine up to 45 ° C in a
washing bag or supplied washing bag.
•
The heating scarf should not be dried or ironed in a dryer.