6
HEATING
|
WALL |
MIRROR
Use the self adhesive backing to fix the mirror heater to the back
of the ThermoSphere mirror adhesive should be applied around
the perimeter of the mirror.
Lay your mirror onto a clean towel to ensure no scratches or
blemishes are formed when applying the heated element.
Wire the mirror heater into a marshalling box behind the mirror.
Then line the mirror up ensuring a 5mm gap is maintained around
the perimeter of the mirror. If installing flush with tiles gently
apply pressure around the outside of the mirror and allow all
adhesives to fully cure before powering up your mirror heating.
If you
’
re using mechanical fixings, ensure they are not within
10mm of the heater pad.
Adhere heater to back of the mirror
Wire up and fix to the wall
The heated mirror can be installed on walls made of wood,
ceramic tiles, marble, etc. Walls must be dry, stable, smooth and
preferably insulated.
PRO TIP
To avoid damage to the mirror, do not over tighten fixings and
ensure that no point pressure is applied to the mirror.
PRO TIP
1
5
2
4
3
1 Mains supply
Mirror heater
2 Mirror
3 Power cable
5 Wall
Mirror
4
Summary of Contents for MH-0600
Page 1: ...HEATING WALL MIRROR Excellence in heating solutions...
Page 4: ...4...
