Note4.
The external temperature control (external thermostat) should comply with CUL or
CSA standard requirements.
Note5.
The lead wire of external temperature control (
external
thermostat) must have a
minimum gauge of 16 AWG.
External thermostat installation:
1. Pop the piece out to open the hole
2. Remove both screws
Figure 12A
Figure 12B
3.
Strip away the cover of lead wire for 50mm
4.
Twist the wire through the end
From the external control box.
Figure 12C
Figure 12D
5. Bend each wire into a circle
6.
Place the twisted wires through the hole
Figure 12E
Figure 12F
7. Connect the wires to the heater and secure in place.
Summary of Contents for HA24-100M
Page 13: ...Figure 13 Figure 14...
