background image

3  

WARNING

Installation Safety Precautions

Use grill, as purchased, only with LP (propane) gas and the 
regulator/valve assembly supplied. If your grill is Dual Fuel ready,
a conversion kit must be purchased for use with natural gas.

Grill installation must conform with local codes, or in their 
absence of local codes, with either the 

National Fuel Gas 

Code, ANSI Z223.1/ NFPA 54, Natural Gas and Propane 
Installation Code, CSA B149.1, or Propane Storage and 
Handling Code, B149.2.

• All electrical accessories (such as rotisserie) must be 

electrically grounded in accordance with local codes, or

 

National Electrical Code, ANSI / NFPA 70 or Canadian 
Electrical Code, CSA C22.1.

  Keep any electrical cords and/or 

fuel supply hoses away from any hot surfaces.

• This grill is safety certified for use in the United States and/or 

Canada only. Do not modify for use in any other location. 
Modification will result in a safety hazard.

WARNING

Do not attempt to repair or alter the 
hose/valve/regulator for any “assumed” defect. Any 
modification to this assembly will void your warranty 
and create the risk of a gas leak and fire. Use only 
authorized replacement parts supplied by 
manufacturer.

CAUTION

Using pots larger than 6 quarts in capacity could 
exceed weight limit of the
side burner shelf

resulting in failure
of grill cart
components.

or side shelf,

CALIFORNIA PROPOSITION 65
1. Combustible by-products produced when using
    this product contains chemicals known to the State
    of California to cause cancer, birth defects, or 
    other reproductive harm.

2. This product contains chemicals, including lead
    and lead compounds, known to the State of
    California to cause cancer, birth defects or
    other reproductive harm.

Wash your hands after handling this product.

CAUTION

• Putting out grease fires by closing the lid is not 

possible. Grills are well ventilated for safety reasons. 

• Do not use water on a grease fire. Personal injury may 

result. If a grease fire develops, turn knobs and LP tank 
off. 

• If grill has not been regularly cleaned, a grease fire can 

occur that may damage the product. Pay close attention 
while preheating or burning off food residue to insure 
that a grease fire does not develop. Follow instructions 
on General Grill Cleaning and Cleaning The Burner 
Assembly to prevent grease fires. 

Grease Fires

• The best way to prevent grease fires is regular cleaning 

of the grill.

NOTE: DO NOT

 over tighten screws and washers that 

come into contact with porcelain coated surfaces. Over 
tightening may cause the porcelain coating to crack and 
break, resulting in exposed metal that will be prone to rust.

Summary of Contents for 463322013

































Reviews: