2
1
NOTE: Front legs are curved.
A
Assemble lower RIGHT front and rear legs with leg extenders to tank support bracket with notches down. Attach with two
#10-24x1-1/4" machine screws
and
wing nuts
.
B
Follow the same procedure for the lower LEFT leg without leg extenders. NOTE: The bracket notches must face up with
short side on the outside as shown.
Qty: 4
#10-24x1-1/4”
Machine Screw
Qty: 4
#10-24
WingNut
Qty: 4
#10-24x1-1/4”
Machine Screw
Qty: 4
#10-24
Wing Nut
Leg Extender
Tank Bracket with notches face down
Lower
Right
Leg
Tank Bracket with notches face up
Left Upper Leg
Tank Bracket on left leg
Right Upper Leg
Leg Extenders
A
Assemble right upper leg (
without match holder
) onto the lower leg assembly
with leg extenders.
Attach with
two #10-24x1-1/4" machine screws and wing nuts.
B
Assemble
left
upper leg with
match holder
onto
lower leg assembly without leg extenders
. Attach with two
#10-24x1-1/4"
machine screws and
wing nuts
.
A
B
Short Side
Axle Hole
A
Lower Left Leg
B
Curved Leg
Outside
461630208 • 13
ASSEMBLY – Model No. 461630208
