4. LCD Screen
5.Transmitter Features
LCD (Liquid Crystal Display) – Displays all icons and temperature
Low battery Indicator
Remote range: 1000FT(300m)
IPX4 Waterproof(Protects from splashing water, but do not submerge in water)
Backlight
Tabletop, and wall-mounted design
-4-
-5-
EN
EN
(Ground Poultry), BBQ, PROG (Program - USER DEFINED TEMPERATURE),
BEEF, VEAL, CHCKE (Chicken), PORK, POULT (Poultry), LAMB, FISH, HAM and
GBEEF (Ground Beef).
7. MEAT:
While in thermometer mode, press to select the meat type: GPOUL
8. TASTE/HI/LO:
While in thermometer mode, press to select the meat
doneness level: RARE, MED RARE, MEDIUM, MEDIUM WELL and WELL DONE.
While in BBQ mode, press to display HI or LO BBQ temperature. Once you set
a temperature, press TASTE/HI/LO again to confirm. While in timer mode,
press to select between an Hour/Minute timer and a Minute/Second timer.
Soft Rubber
Sleeve
Probe
Sockets
Hanging
Battery
Compartment
Tabletop Stand
1
2
Probe 1 Set
Temp
Probe 1 Temp
Reading
Probe 3 Set
Temp
Probe 3 Temp
Reading
Probe 4 Set
Temp
Probe 4 Temp
Reading
Probe 2 Set
Temp
Probe 2 Temp
Reading
Meat type
Timer
5.1 Buttons
1.
:
Press to turn on/off the Transmitter. Press and hold for 3 seconds
to switch between °C and °F.
/°F/°C
2. :
Press to turn on/off the backlight. Backlight will automatically turn off
after 15 seconds of inactivity.
6. Installing Batteries
Open the battery compartment of the receiver and insert two “AAA” batteries
with correct polarity.
Open the battery compartment of the transmitter and insert two “AAA” batteries
with correct polarity.
7. Turn On/Off Unit
Press button on the receiver to turn on/off the receiver;
Press
button on the transmitter to turn on/off the transmitter.
/°F/°C
8. Auto Off Feature
The receiver will turn off automatically if it has not received the temperature
signal from the transmitter for more than 30 minutes.
The transmitter will automatically shut down if the temperature of the 4 probes
stays below 40 ˚C for 2 hours.
9. Synchronize/Pair Transmitter and Receiver
The transmitter and receiver were already paired at our manufacturing facility.
Usually you do NOT need to re-synchronize or re-pair the units. You just plug in
