Minitherm AQUA
34
7
Cleaning and maintenance
To secure proper work of the stove, cleaning and maintenance is neccesary.
7.1
Daily cleaning
Turn the stove off and wait until it has been cooled.
Open the stove door.
Using safety gloves clean combustion deposits out of the firebox to ensure a
smooth flow of air necessary for efficient combustion. Using safety gloves take
the firebox out and empty its content into a fire-resistant container.
Clean the holes in the firebox with an appropriate screwdriver (if neded) .
Put the firebox back onto the bearing making sure it is properly seated on the
heater.
Close the door before ignition.
7.2
Weekly cleaning
Turn the stove off and wait until it has been cooled.
Open the stove door.
Using the vacuum cleaner take the ash out of the stove into a fire-
resistant container.
Put the ash pan back into the firebox.
Close the door before ignition
Summary of Contents for Minitherm AQUA
