DE
GB
15
8. Switch on the main power supply.
9. Heater should now function!
* The 4,5kW and 5,5kW model are delivered without plug.
Appliance used as oversink model:
1. Left outlet is the water outlet (hot), right outlet is the water inlet
(cold).
2. Prepare the water connections to the tap. Make sure main
water supply is switched off.
3. Prepare the electrical connections for the heater. Make sure
main power is switched off.
4.
To prepare the connection to the water supply Teflon tape
must be used for sealing the pipes.
5. Mount the tap to the main water supply.
6. Level the tap horizontally.
7. Mount the water heater to the tap.
8. Open the main water supply and check for leakage and re-
lease air from the system by opening the hot water tap.
Installation diagram for oversink usage
STOP
2
7
6
5
4
3
1
8