21
DE
GB
B5.
5.
L N
1
2
B6.
2
3
1
INLET
OUTLET
6.
1. Switch off the power supply and prepare the mains cable as shown
inB1 as shown.
2. Fix the bracket to the wall with two screws as shown in B2.
3. Loosen the device screws on both sides and remove the cover as
shown in B3.
4. The left outlet of the device is the water outlet (hot / red), the right
outlet is the water inlet (cold / blue). Push the mini instantaneous wa-
ter heater towards the bracket until you hear a “click”, as shown in B4.
5. Connect your device to your main water supply using the diagram.
Make sure that the main water supply is turned off when doing this.
6. Open the main water supply and check for leaks. bleed the system by
opening the hot water tap.
7. When all air has been purged from the system, prepare the electrical
connections for the device as shown in B5. Make sure that the main
power supply is switched off..
8. Attach the cover to the water heater and tighten the screws on both
sides, as shown in B6.
9. Switch on the main power supply.
10. Device should work now !
The device must be properly earthed.
（3.25改字体）Manual iwh mini elex v2（2021.03.24改）.indd 21
（3.25改字体）Manual iwh mini elex v2（2021.03.24改）.indd 21
2021/3/26 15:34:57
2021/3/26 15:34:57
