Thermo Scientific
imPULSE S.U.M. with Touchscreen Console User’s Guide
|
121
Chapter 5
|
BPC loading instructions
6. Grab the joined pull tabs and pull upward to remove the paper
membranes from the connectors (Figure 5.39). The pull tabs will also
be removed.
Figure 5.39. Pulling tabs to remove paper
membranes.
5.3.3 Probe insertion
Note:
The vessel shown in the following figures is the 5:1 HyPerforma
S.U.B. but the connection process is the same.
1. Attach probe clips onto the outer support container above the
probe assembly (Figure 5.40). Plastic probe clips slide on with firm
pressure.
Figure 5.38. Squeezing connectors together.
