ThermoFisher Scientific NanoDrop Eight, User Manual

Page: 85 / 152

7
Learning Center
Measure a Micro-Volume Sample
Thermo Scientific NanoDrop Eight User Guide 85
5. To measure another sample:
– Lift the arm
– Clean all pedestals with new wipe
– Load the next sample(s) and quickly lower the
arm
– Start the sample measurement
– Wait for the measurement to complete
The new spectrum replaces the previous one on the
spectral display and the new reported values replace
the previous ones in the table.
6. When you are finished measuring samples:
– Select the End Experiment icon (see previous
image)
– Enter an experiment name or leave the default
experiment name
– Select Save
– Lift the arm and clean all pedestals with a new
wipe
If finished with the instrument for the day, clean
the pedestals with DI H2O (see
Clean pedestals
between users )
Acquired data are automatically saved in an experiment
with the entered name. In the default configuration,
experiments are stored in a database according to
acquisition date, experiment name,
application used and
any assigned labels (see Manage identifiers ).
Select to end
experiment
Cancel to measure
more samples
Select Save to end
and save experiment