ThermoFisher Scientific HERASAFE 2030i Series, Operating Instructions Manual

Page: 109 / 173

Herasafe 2030i / Maxisafe 2030i
50155215 | 99
Operation |
Chapter 6
b. If you do not already have a Thermo Fisher Cloud account open the URL below using a
web browser:
https://www.thermofisher.com/cloud
c. Choose the “create an account” option.
WiFi Network Specifications
Tapping the “Connectivity” button in the “Settings” screen takes you to the
“Connectivity” screen shown in Figure 97. If the unit includes a WiFi module, but the unit
has not been connected to a WiFi (wireless) network, the following “Connectivity” screen
is displayed.
Figure 97 “Connectivity” Screen
Parameter Specification
WiFi protocol 802.11b/g/n
WiFi Security WEP, WPA PSK, WPA2 PSK
WiFi band 2.4 GHz
Firewall Ports that must open 443, 22, 1023 and ICMP Ping
NOTE
Thermo Fisher Cloud-connected devices do not support the use of proxy
servers and enterprise networks which require identity/username for internet
access. The entry of username/password via a Web browser is not supported
either.
NOTE Connectivity with WiFi option
The connectivity option is only available in the EU, US and CAN regions.
WiFi figures are only displayed if the region set in the
“
Region
”
screen (see
“Initial Setup” on page 37) is allowed.
If the customer uses WiFi stick other than the one supplied with de device or
sold by Thermo as a spare part, the device will lose its approval. Use only
original parts.
For the WiFi setup connection to Thermo Fisher Cloud, the customer's IT
department should be consulted.
Thermo Fisher BSC
11:42 AM I 08/10/2018
Connectivity
WiFi
Thermo Fisher Cloud
Connect