Controlled-Rate Freezer
PC Interface Software | 65
Information Fields
This section enables the user to add or delete information
fields of a freezer profile. There are seven information fields
that are predefined such as, Cryoprotectant, Data Tag, Date/
Time, Media, Operator, profile Name and Sample Type. The
information fields that are added are available in subsequent
runs.
The user can add 5 additional fields. The total number of
information fields that can be defined is 12 including the
default information fields.
Figure 162. Add Information Fields
The below error message is displayed when the user tries to
add more than 5 custom fields.
•
The new fields that are added cannot have the same
name as a default predefined field.
•
Information Field name length must be a minimum 5
characters.
•
Information Field name must not start with any special
character or numerical value. It must start with a letter
only.
•
Information Field name can contain a special character as
the second character or thereafter.
•
Default information fields are Profile Name, Data Tag,
Date/Time, Operator, Cryoprotectant, Media, and
Sample Type.
•
The additional fields are stored in “.properties” file.
•
All fields including default Information fields are maximum
of 20 characters only.
To remove a field,
1. Select the “delete” field. A dialog box appears.
2. Select the field and click “OK.”
Note:
Mandatory fields are not removable. Mandatory fields
are denoted with an “
*
.”
Status Bar
The status bar displays the commands or the actions to
perform in the bottom left corner of the window and status of
connection between the unit and the PC software (unit
connected or unit not connected), the port connected and the
user name in the bottom right corner of the window.
shows the status bar.
Figure 163. Status Bar
This message appears when logged in user is deleted.
Table 12. Error Messages in User
Error Message