The run pauses for the duration set in the
Set Time-Outs
screen (see “Setting time-outs”
). In the
Pause Run
dialog box:
•
Remaining Time
shows the remaining time for the pause.
•
Elapsed Time
is continually updated to show the time the run has been in process.
2.
If you want to:
• Pause until the default pause has elapsed – Do nothing.
• Pause for a specific amount of time – Select
Edit Time
, enter the duration of the pause, then
select
Done
. The run resumes when the pause is complete.
• Resume the run immediately – Select
Resume Run
(to the left of the dialog box).
Stopping a run
In the
Run Monitor
screen, select
Stop
, then
OK
.
The run stops and the
Run Report
opens.
Using the Run Monitor button
The
Run Monitor
button (Figure 11) is displayed at the top of the
Run Monitor
screen. If you leave the
Run Monitor
screen during a run, this button also appears at the top of all menu screens.
Figure 11 The Run Monitor button
You can select the
Run Monitor
button to return to the
Run Monitor
screen at any time.
If an error occurs during the run, the area showing the current stage, in the middle of the button, is
replaced by an alert icon:
Chapter 3
Performing a run
Monitoring a run
3
62
Veriti
™
Thermal Cycler User Guide