Thermocold DOMINO BASIC Series, User Manual, Page: 9 / 21

User Manual
3. Buttons description and their functions
The controller is provided with six buttons to interact with user and installer parameters.
Here below the description of the accessible operations through the buttons.
Press and release in the main display:
It allows you to visualize the chiller (label SETC) or heat pump (label SetH)
set point
Press and release 2 times in the main display:
If the energy saving or dynamic set point is enabled for machines without
storage, the icon Vset is lit and the display shows the work real set
Press for 3 seconds and release in the main display:
It allows you to edit the chiller / heat pump set point
Press and release in the ALrM menu:
It allows you to reset the alarm (if this alarm can be reset) from the menu
ALrM
Press and release:
from the main display it allows you to show the values of the configured
probes (temperature / pressure) in the upper display, and the corresponding
label in the lower display.
Press and release in the PrG menu:
it allows to slide in the parameters folders (ST, CT, etc.) and in the
parameters list.
In parameter editing phase, it increases the value.
Press and release:
from the main display it allows you to show the values of the configured
probes (temperature / pressure) in the upper display, and the corresponding
label in the lower display.
Press and release in the PrG menu:
it allows to slide in the parameters folders (ST, CT, etc.) and in the
parameters list.
In parameter editing phase, it increases the value.
Press and release:
It provides access to menu functions
Press for 3 seconds and release:
it allows you to adjust the watch in the provided models.
Press and release in the PrG menu:
it quits the parameter change.