2.
Once the binding cycle is completed, and the buzzer sounds, the Auto-Off function is initiated
automatically. If the “Bind “ button is not pressed again within ten minutes, the machine will turn
off automatically.
②Safety Instructions
•
Read this operation manual before using the unit.
•
Never attempt to open and service the unit. The are NO user serviceable parts inside the thermal
binding machine.
•
Any repairs must be done by authorized personnel. Unauthorized servicing of the unit will render
the warranty void.
•
Plug the machine into a grounded socket. It should be easily accessible and out of the way of
walking passages. If it is absolutely necessary to use an extension cord, it must be a heavy duty
grounded appliance cord.
•
The heating unit surface will be hot during operation. Children should not operate the machine
without close adult supervision.
•
This machine is designed and manufactured for indoor use only.
•
Take care to prevent spilling liquid into the machine.
•
Never put your finger or anything other than the right type of thermal binding covers, or non-
conductive adapter into the machine.
Basic Machine Maintenance
1. Unplug the machine before attempting to clean. Do not immerse in water. A damp cloth with mild
detergent can be used to clean the outer surface.
2. In the event that adhesive should get onto the heating plate, call for cleaning instructions.
Trouble Shooting Guide
No power or LED Indicator does not light up:
•
Check that the power plug is securely plugged into an operating wall socket. Make sure that the
on/off switch in the right rear of the machine is in the “on” position. If the machine is still not
working, call for repair.
Improper Binding and Loose Pages
1. The key to good binding is having
enough heat and time
for the adhesive to get thin enough to
slightly wick into the paper, so when the adhesive cools, the bind is not just at the edge. The glue
becomes part of the paper.
2. The spine size of your cover refers to the width of the strip of adhesive inside. Measure the stack of
papers that you wish to bind, without pinching. If your measurement is in between sizes, use the next
