manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 251 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 251

 

3 

Learning Center

NanoDrop One Viewer Software

Thermo Scientific

NanoDrop One User Guide

251

Manage Experiments and Associated Data

Use the Viewer software to open and view stored spectra and associated data from any 
experiment that was either exported from the instrument and then imported to the PC, or 
saved directly on the PC immediately after the measurement. Experiments are stored in a 
database on the computer according to acquisition date, experiment name, 

application used

 

and any 

assigned labels

.

Import Experiments

You can import data acquired with the NanoDrop One instrument to the NanoDrop One 
Viewer software installed on a personal computer, in order to view or print the data at your 
location and convenience.

Import experiments to Viewer software

–

connect portable USB memory device with exported SQL file to personal computer 
that has NanoDrop One Viewer software installed

–

from Viewer software, choose 

File > Import Data

–

navigate to portable USB device, select exported SQL file and choose 

Open

Export Experiment

Export spectra and results for selected measurements in several 
formats

Manage Identifiers

Add user-defined labels to experiments, view assigned labels and 
remove or delete labels

Experiment Details

Display information about the open experiment including 
application type, date and time measured, number of 
measurements, instrument serial number, software and firmware 
version numbers, and any assigned labels

Delete Experiment

Delete selected experiment

Notice

: Deleted data cannot be recovered.

Note  

• The data must first be exported from the instrument in the database (SQL) format to 

a portable USB memory device (see “Export Data” in 

General Operations 

for details).

• To learn how to save data directly on a personal computer after each measurement is 

completed, see “Set Up Ethernet Connections” or “Set Up Wi-Fi Connections” in 

Set 

Up the Instrument

.

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments