manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 259 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 259

 

3 

Learning Center

NanoDrop One Viewer Software

Thermo Scientific

NanoDrop One User Guide

259

Expand or Contract Displayed Spectra

After you open an experiment, you can use the 

scroll wheel on your mouse

 to expand or 

contract a displayed spectrum or spectra along the X- and Y-axis.

To reset both axes, double-click the spectral pane.

Change Concentration Unit

Many applications offer a choice of concentration units.

Change concentration unit for selected experiment

–

open the experiment

–

use the drop down menu, if available, in the measurement table to change the 
displayed unit

After the unit is changed, all reported concentration results are recalculated to comply 
with the new unit.

View Experiment Details

You can display information about the open experiment including application type, date and 
time measured, number of measurements, instrument serial number and any assigned labels.

View experiment details

–

open the experiment

–

click 

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments