Thermo Scientific Barnstead
Pacific TII
Pure water System
20
6.
Put now the hose of the sterile overflow Ø 8 mm into the over-
flow on the tank back and
connect these with the drain
7.
Open the feedwater tap.
8.
Check that all connections are secure and do not leak.
9.
Check the feedwater pressure. It must be maintained within the specified pressure range
(see Technical specifications).
Before you switch the system on, read the procedure for rinsing reverse
osmosis membranes supplied in preservative solution in the „Rinsing and
disinfection“
section!
10.
Switch the system on at the on/off switch.
11.
After a brief flush, your system produces purified water which flows into the tank.
