Model 3010 Incubator ________________________________________________________Installation and Start-Up
1 - 1
Section 1 - Installation and Start-up
1.1 Name and Description of Parts
Figure 1-1
Water Jacket Incubator
• Outer Door - Reversible to opposite swing, see Section
4.4
• Heated Inner Door - Keeps chamber interior dry.
Reversible to opposite swing, see Section 4.4.
• Chamber Gas Sample Port - Used for sampling chamber
CO
2
content, using a Fyrite or similar instrument.
• Main Power Switch
• Control Panel - Keypad, Displays and Indicators. (See
Figure 1-2).
• Fill Port - Used for filling the water jacket.
• Water Jacket Vent- Do not cover! Allows air to escape
from the water jacket during filling and normal expan-
sion and contraction when the incubator heats or cools.
• Leveling Legs - Used to level the unit.
• Water Jacket Drain – Remove plug and use hose barb
insert included. Plug when not in use.
Note:
The incubators are stackable. See Section 1.4.
*When setting up the incubator, install the cover plate
packed inside the incubator shipping carton.