4 Startup procedure
Thermo Scientific
12
50108226_02.2007
Control unit TELEMODUL 20 C / 40 C (5):
CAUTION
Connect only the appropriate power supply unit to the TELEMODUL 20 C
(cf. Technical specifications, control units).
Connect only the appropriate power supply unit to the TELEMODUL 40 C
(cf. Technical specifications, control units).
Connection to another power supply unit may cause damage to the
control unit.
Connect the mains cable (14) with the power supply unit (13).
Plug the power supply unit connecting cable (12) into the power supply unit
intake (15) of the TELEMODUL 20 C / 40 C (5).
You can connect a stirring drive (2) directly to the control unit TELEMODUL 20 C / 40 C
(5) (standard version).
When using the four-way or eight-way benchtop distributor (Figure 5), you can control 2,
4, 6 or 8 identical stirring drives (2) (i.e. the stirring drives should be connected in pairs).
This is particularly important when combining the powerful TELEMODUL 40 C control
unit with the smaller MINI, MICRO or COMPACT stirring drives. All stirring drives (2) stir
at the same speed and are completely synchronized.
CAUTION
Before connecting the stirring drives (2) to the TELEMODUL 20 C / 40 C
control unit (5), please note the connection options as listed in Table 1.
Do not connect a single MINI, MICRO or COMPACT stirring drive to the
TELEMODUL 40 C control unit. This may result in overload and damage
the stirring drives.
You may connect only stirring drives of the same type to the benchtop
distributors, and you may only connect them in pairs.
