Thermo Scientific Thermolyne NCAT F85930, Installation And Operation Manual

Page: 27 / 94

6
Installation
The Balance Default Settings When Used in the Type F85900 NCAT Furnace:
Thermo Scientific NCAT Asphalt Content Tester 25
The Balance Default Settings When Used in the Type F85900
NCAT Furnace:
Time: 24 hour format (0 to 24 hours).

Date: US type, 2 Digit Year format, Use the 2-digit year only.
Examples:

23:30:30

12/29/97
To Set the Time and Date Setting
The balance supplies the date and time to the furnace controller. For ease of record keeping, you
should set the time to reflect your local time and date.
We recommend preforming a hidden “weight” key routine to print the initial date and time before
making any changes. After changing the date and time, print the information again and compare to be
certain you changed it correctly.
To Set the Time
1. Switch the green power switch down to “OFF”.
2. While holding the “4” key down, switch the green power switch up to “ON”, the red display
should indicate [BAL CAL].
3. Press and hold the balance “ON/OFF” key.
4. Press the balance “ENTER” key, then release both keys. “71nE” will be displayed, press the balance
“ENTER” key. The two hour digits will be blinking (Note the time is in a 24 hour format).
5. Press the balance “ON/OFF” key until the correct hour is displayed.
6. Press the balance “ENTER” key, the two minute digits will be blinking.
7. Press the balance “ON/OFF” key until the correct minute is displayed.
8. Press the balance “ENTER” key, the balance will return to the normal weight display.
To Set the Date
1. Switch the green power switch down to “OFF”.
2. While holding the “4” key down, switch the green power switch up to “ON”, the red display
should indicate [BAL CAL].
3. Press and hold the balance “ON/OFF” key.
4. Press the balance “ENTER” key, then release both keys. [71nE] will be displayed, press the balance
“ON/OFF” key, [dA7E] will be displayed.
5. Press the balance “ENTER” key, [US] (United States) or [Eur0] (European) date type will be
displayed.
6. Press the balance “ON/OFF” key until the desired type is displayed.