Thermo Scientific Surveyor UV Plus, Hardware Manual

Page: 32 / 76

2
Installation
Making the Back Panel Connections
16 Surveyor UV/Vis Plus Detector Hardware Manual Thermo Scientific
Making the Contact Closure Connections
The system interconnect cable coordinates the timing of the Surveyor plus modules during an
injection sequence.
There are two versions of the system interconnect cable (contact closure):
• The older version has five combicon connectors. You can identify the detector connector
by the DET tag on its adjacent cable as shown in Figure 12 .
• The newer version has seven combicon connectors, with three connectors labeled
DETECTOR as shown in Figure 13 .
Figure 12. 5-connector version of the system interconnect cable
Figure 13. 7-connector version of the system interconnect cable
LC PUMP
MS PUMP
M/S
A/S
DET
F5049-010
To
MS detector
To
Surveyor MS
Pump Plus
To
autosampler
To
detector
To
Surveyor LC Pump
Plus
DETECT
OR
DETECT
OR
DETECT
OR
PUMP
PUMP
A/S
M/S
To
autosampler
To
detector
To
pump
To
pump
To
MS detector
To
detector
To
detector