Thermo Scientific SUPER-NUOVA+ HP88850190, Operation Manual

Page: 23 / 43

23
Unpacking and Installation
Warning
Use a properly grounded electrical outlet
of correct voltage and current handling
capacity.
Do not remove or modify grounded power
plug. Use only properly grounded outlets
to avoid shock hazard. Not rated for use in
hazardous atmospheres.
Do not use in the presence of flammable or
combustible materials; fire or explosion may
result. This device contains components
which may ignite such materials. If
explosion proof models are required,
contact Customer Service at 1-800-553-
0039 for more information.
Do not use in highly corrosive atmos-
pheres; corrosive fumes and spills may
damage top and internal components,
creating shock hazard.
Note
Some misalignment of the motor bearings
in this product may have occurred during
shipping. Prior to using this product, run the
stirrer at maximum speed for ten minutes to
realign the bearings.
Unpacking
Remove your SUPER-NUOVA
+
unit from the carton.
Inspect to ensure that the unit has not been damaged
during shipment. If the unit appears to have sustained
shipping damage contact the distributor from whom you
purchased this product or Customer Service at 800-553-
0039. Check for remote probe and thumbscrew prior to
discarding packaging.
The following items are included in the shipment:
SUPER-NUOVA
+
unit
Cord
Remote Probe – PT100
Stir Bar (Stirring models only)
Knob
Operation's Manual
If any of these items are missing from the carton,
contact Customer Service.
Installation
Set the unit on a flat stable surface at least 12" away
from combustible materials, and plug the cord set into a
properly grounded electrical outlet of correct voltage and
current handling capacity.