Thermo Scientific STERI-CYCLE i160, User Manual

Page: 180 / 200

12
Annex: Data communication
Data logger structure
12-14
S
TERI-CYCLE
i160
/
i250
Thermo Scientific
Overview of possible event entries in bit coding
Overview of event entries, Part I:
Code Event Special information (Byte 8-15)
0x01 Set values from all servo control
circuits (periodically in one-minute
cycles) Current values for temperature,
CO
2
, O
2
and rH
0x02 Set value change (at beginning of
new section) Set value for temperature, CO
2
, O
2
and rH
0x10 Set value change T Set value for temperature, CO
2
, O
2
and rH
0x11 Set value change CO
2
Set value for temperature, CO
2
, O
2
and rH
0x12 Set value change O
2
Set value for temperature, CO
2
, O
2
and rH
0x20 New error T Status / error registration for
temperature, CO
2
, O
2
and rH
0x21 New error CO
2
Status / error registration for
temperature, CO
2
, O
2
and rH
0x22 New error O
2
Status / error registration for
temperature, CO
2
, O
2
and rH
0x2F New error system Status / error registration for
temperature, CO
2
, O
2
and rH
0x30 Power reset Set value for temperature, CO
2
, O
2
and rH
0x31 Door open Current actual values for
temperature, CO
2
, O
2
and rH
0x32 Door closed Current actual values for
temperature, CO
2
, O
2
and rH
0x40 Calibration T Calibration level (2 bytes), old
temperature, new temperature
(2 bytes each)
0x41 Calibration CO
2
Calibration level (2 bytes), old CO
2
value, new CO
2
value (2 bytes each
(2 bytes each)
0x42 Calibration O
2
Calibration level (2 bytes), old O
2
value, new O
2
value
(2 bytes each)
0x50 Start auto-start Status / error registration for
temperature, CO
2
, O
2
and rH
0x51 auto-start successfully completed Current actual values for
temperature, CO
2
, O
2
and rH