Thermo Scientific Star A223, Instruction Sheet

Page: 8 / 8

Orion Star A223 and Star A323 Portable RDO/DO Meters
North America
166 Cummings Center
Beverly, MA 01915 USA
Toll Free: 1-800-225-1480
Tel: 1-978-232-6000
info.water@thermo.com
Netherlands
Tel: (31) 033-2463887
info.water.uk@thermo.com
India
Tel: (91) 22-4175-8800
wai.asia@thermofisher.com
©2011 Thermo Fisher Scientific Inc. All rights reserved. All trademarks
are the property of Thermo Fisher Scientific Inc. & its subsidiaries. Water Analysis Instruments
www.thermoscientific.com/water
China
Tel: (86) 21-68654588
wai.asia@thermofisher.com
Singapore
Tel: (65) 6778-6876
wai.asia@thermofisher.com
Japan
Tel: (81) 045-453-9175
wai.asia@thermofisher.com
Australia
Tel: (613) 9757-4300
in Australia (1300) 735-296
InfoWaterAU@thermofisher.com
9 0 0 1 : 2 0 0 8
68X576603 RevA 0811
Viewing the Calibration Log
1. In the measurement mode, press .
2. Press , , or to highlight View Log and press f3 (select) .
3. Press or to highlight Calibration Log and press f2 (accept) .
4. Press or to highlight DO Channel and press f2 (select) .
5. Press or to highlight DO or RDO as the calibration type and press f2 (select) .
6. The meter will display a list of calibrations for the selected channel and calibration type. The list shows
the sequential number of the calibration and the date and time it was saved ( 07/01/2011 12:45 ).
7. To view the calibration data, press or to highlight a specific calibration and press f2 (select) .
Press f2 (print) to print the calibration or press f1 (back) to return to the list of calibrations.
8. Press to return to the measurement mode.
Viewing the Data Log
1. In the measurement mode, press .
2. Press , , or to highlight View Log and press f3 (select) .
3. Press or to highlight Data Log and press (accept) .
4. The meter will display a list of the data points. The list shows the sequential number of the data point and
the date and time the data point was saved ( 07/01/2011 12:45 ).
5. To view the measurement information for an individual data point, press or to highlight the data
point and press f2 (select) . Press f2 (print) to print the data point or press f1 (back) to return to the list of
data points.
6. Press to return to the measurement mode.