P
Preface
Precautions
Thermo Scientific
Sorvall LYNX 4000 / 6000
v
Precautions
A trained specialist can be a laboratory assistant or medical technologist.
WARNING
•
Plug the centrifuge only into sockets which have been properly grounded.
•
If a hazardous situation occurs, turn off the power supply to the centrifuge and leave
the area immediately.
Note
In order to ensure safe operation of the Sorvall LYNX 4000 / 6000 centrifuge, general safety
regulations must be followed: Mind the accident prevention regulations in your country.
The work environment should guarantee the following:
WARNING
•
Maintain a radius of at least 30 cm around the centrifuge.
The clearance around the centrifuge is reduced, when the centrifuge is bolted down
(Optional Seismic Bolt-down Kit 75006500).
•
Implementation of special measures which ensure that no one can approach the
centrifuge for longer than absolutely necessary while it is running.
The power supply must be interrupted in case of an emergency. Turn off the centrifuge at
the main switch. The mains plug must be freely accessible at all times. Pull out the power
supply plug or disconnect the power supply in an emergency.
In case of rotor failure the centrifuge can be damaged. The coolant can escape. Ventilate the
room well and leave it. Inform customer service.
Note
Not following these instruction can cause damage.
Summary of Contents for Sorvall LYNX 4000
Page 18: ...1 Introduction and Description 8 Sorvall LYNX 4000 6000 Thermo Scientific ...
Page 28: ...2 Before Use 18 Sorvall LYNX 4000 6000 Thermo Scientific ...
Page 34: ...3 Control Panel 24 Sorvall LYNX 4000 6000 Thermo Scientific ...
Page 71: ...Thermo Scientific Sorvall LYNX 4000 6000 61 Index ...
