Thermo Scientific SAM12, Manual

Page: 35 / 176

Issue: 1.0 Unpacking and Installation
Thermo Fisher Scientific SAM12 User Manual 4-1
Chapter 4
Unpacking and Installation
Unpacking
After installation of 2-door SAM12, ensure both doors are
closed before switch-on.
WARNING: DUE TO THE LEAD SHIELDING THE SAM12
WEIGHS 1.5 TONS. A FORK-LIFT TRUCK OF
SUITABLE LIFTING CAPACITY MUST BE USED
TO MOVE AND TRANSPORT THE SAM12
SAFELY, USING THE INTEGRAL FORK-LIFT
CHANNELS. WHEELS, SKATES, SKIDS OR
SIMILAR DEVICES MUST NOT BE USED TO
MOVE THE SAM12.
PARTICULAR CARE SHOULD BE TAKEN ON
GRADIENTS
ENSURE THE INSTALLATION SITE IS
SUITABLY ROBUST
DO NOT ATTEMPT TO OPEN DOORS UNTIL
THE TRANSIT SUPPORTS HAVE BEEN
REMOVED (see
Removing Door Transit Supports
(page 4-3)
).
The SAM12 case should contain the following:
•
Small Articles Monitor (SAM12)
•
1 or 2 Door Handles
•
Combined Operational and Maintenance
Manual
•
Pack containing ON/OFF keys, Dongle and
Screen Cleaner
•
Calibration Certificate
•
SAM12 Mains power cord (EC countries
only)
•
Printer with printer cable
Printer Tractor Feed
Plastic locating tray
(Optional)
•
Mounting plinth AE0181B
(Optional)
Remove the top and side packing panels and peel off the
polythene wrapping.
To unpack the SAM12