10
PowerEase
®
300W Power Supply User Guide
Create a program
1.
Select
Program Mode
by scrolling down using the
key.
2.
When highlighted press
Mode
key.
3.
Select program file number using the
arrow keys.
4.
When program file number is located press the
Mode
key.
5.
Select the number of steps by using the arrow
arrow keys.
6.
To enter the parameters of the run press the
Mode
key.
7.
Voltage will appear on the display to enter voltage press
Mode
key.
8.
To change voltage, use the
arrow keys.
9.
Select AMP or WAT by pressing the
Mode
key until desired parameter is flashing.
10.
Increase or decrease the value by using the
arrow keys.
11.
To set the time in hours press the
Mode
key.
12.
Increase or decrease the value by using the
arrow keys.
13.
Select the
Mode
key again to select minutes.
14.
Increase or decrease the value by using the
arrow keys.
15.
Repeat 6 thru 14 above to create successive steps.
