2 | Thermo Scientific Orion Versa Star Pro Meter and USB Printer Interfacing
Meter to Printer Interface Requirements
Component
Requirement
Meter
Thermo Scientific Orion Versa Star Pro meter, serial number V10000 or higher
Printer
PCL6 driver compatible
Printer Paper Letter size format
Cable
Micro AB USB Male (meter connection) to printer-specific USB connection (may vary by printer model)
For Tested Printer Models, printer cable requirement is Micro AB USB Male to Standard USB B Type cable:
Note: The printer cable must be purchased separately and the printer connection type may vary by printer model.
Meter Setup
1.
Power on the Orion Versa Star Pro meter.
2.
In the measurement mode, press the setup key to access the Main Setup menu.
3.
Press the
,
,
or
key to highlight the Instrument Settings icon and press the f3 (Select) key.
4.
Press the
or
key to highlight Communication and press the
or
key to highlight USB PRINTER.
5.
Press the f2 (Page 2) key, press the
or
key to highlight Printing and press the
or
key to highlight On.
6.
Press the
or
key to highlight Print Format and press the
or
key to highlight Printer.
7.
Press the measure (esc) key to return to the measurement mode.
8.
The USB symbol should now be displayed on the top of the screen:
Printer Setup
1.
Unpack the printer and prepare according to the instructions in the printer manual. Add letter size paper to the paper tray.
2.
Power on the printer and confirm the printer status is ready.
