25
Thermo Scientific Orion Star A329 Portable pH/ISE/Conductivity/RDO/DO Meter Reference Guide
Chapter 6 Conductivity Calibration
Automatic and Direct Calibration
0OFUPmWFDPOEVDUJWJUZTUBOEBSETDBOCFVTFEGPSDBMJCSBUJPO"MXBZTVTFGSFTITUBOEBSETBOETFMFDUTUBOEBSETUIBU
are near the sample conductivity. Prepare the conductivity cell according to the instructions in the conductivity cell
VTFHVJEF$POOFDUUIFDPOEVDUJWJUZDFMMBOEBOZPUIFSFMFDUSPEFTUPCFVTFEUPUIFNFUFS1PXFSPOUIFNFUFSBOETFU
the measurement mode to conductivity.
Note: For an automatic calibration, the nominal cell constant of the conductivity cell must be entered in the setup menu
before the calibration is performed and Thermo Scientific Orion 100 μS/cm, 1413 μS/cm and/or 12.9 mS/cm conductivity
standards must be used.
Note: In most calibration screens, press
f1 (esc)
to return to the measurement mode without saving the calibration.
*OUIFNFBTVSFNFOUNPEFQSFTT
f1 (cal)
. In dual and multi channel measurement displays, press
or
to highlight
Conductivity – Channel
and press
f2 (select)
.
3JOTFUIFDPOEVDUJWJUZDFMMBOEBOZPUIFSFMFDUSPEFTJOVTFXJUIEJTUJMMFEXBUFSCMPUESZXJUIBMJOUGSFFUJTTVFBOE
place into the standard.
3. When the conductivity cell and standard are ready, press
f3 (start)
.
8BJUGPSUIFDPOEVDUJWJUZWBMVFPOUIFNFUFSUPTUBCJMJ[FBOETUPQnBTIJOHBOEQFSGPSNPOFPGUIF
GPMMPXJOHBDUJPOT
a. Press
f2 (accept)
to accept the displayed conductivity value.
b. Press
f3 (edit)
to access the numeric entry screen and edit the conductivity standard value.
i. Press
,
,
or
to highlight a number or decimal point, press
f3 (enter)
to select the
IJHIMJHIUFEJUFNBOESFQFBUVOUJMUIFTUBOEBSEWBMVFBUUIFNFBTVSFEUFNQFSBUVSFJTTIPXO
ii. Press
f2 (done
) to exit the numeric entry screen.
iii. Press
f2 (accept)
to accept the entered conductivity value.
1SFTT
f2 (next)
UPQSPDFFEUPUIFOFYUTUBOEBSEBOESFQFBUTUFQTUISPVHIPSQSFTT
f3 (cal done)
to save
BOEFOEUIFDBMJCSBUJPO*GmWFTUBOEBSETBSFVTFEUIFDBMJCSBUJPOXJMMTBWFBOEFOEPODFUIFmGUIDPOEVDUJWJUZ
standard value is accepted.
5IFNFUFSXJMMEJTQMBZUIFDBMJCSBUJPOTVNNBSZJODMVEJOHUIFBWFSBHFDBMDVMBUFEDFMMDPOTUBOUBOEFYQPSUUIFEBUB
to the calibration log. Press
f1 (meas)
to proceed to the measurement mode or press
f2 (print)
to proceed to the
measurement mode and export the data to a printer or computer.
