Thermo Scientific Orion Star A212, Reference Manual

Page: 22 / 52

17
Thermo Scientific Orion Star A212 Benchtop and Star A222 and Star A322 Portable Conductivity Meter Reference Guide
Chapter 5 Temperature Calibration
5IFNFUFS"5$UFNQFSBUVSFEJTQMBZIBTBSFMBUJWFBDDVSBDZPGœ¡$"5$QSPCFT CPUITFQBSBUFBOEUIPTF
CVJMUJOUPFMFDUSPEFTIBWFWBSZJOHUFNQFSBUVSFBDDVSBDJFTVTVBMMZœ¡$UPœ¡$6TFUIJTGVODUJPOPOMZJGJUJT
necessary to calibrate the temperature readings taken by the ATC probe. Since the temperature offset calculated
during the calibration is applied to all future temperature measurements, recalibrate if a different ATC probe is used.
5FNQFSBUVSFDBMJCSBUJPOJTGPSUIFDBMJCSBUJPOPGBO"5$QSPCF TFQBSBUFPSCVJMUJOUPBDPOEVDUJWJUZDFMM*G
NBOVBMUFNQFSBUVSFDPNQFOTBUJPOJTCFJOHVTFEBOEUIFEJTQMBZTIPXT."/BTUIFUFNQFSBUVSFTPVSDFJDPO
TFUUIFNBOVBMUFNQFSBUVSFWBMVFVTJOHUIF.BOVBM5FNQ7BMVFNFOV5IFUFNQFSBUVSFDBMJCSBUJPONFOVJTOPU
accessible unless an ATC probe is connected to the meter.
*OUIFNFBTVSFNFOUNPEFQSFTT .
2. Press , , or to highlight COND Channel and press f3 (select) .
3. Press or to highlight Temperature and press f3 (select) .
1SFTT
or to highlight Temperature Calibration and press f3 (select) .
1SFTT or to highlight ATC UPJEFOUJGZUIF"5$QSPCFUIBUXJMMCFDBMJCSBUFEBOEQSFTT f3 (select).
1MBDFUIF"5$QSPCFBOEUIFSNPNFUFSTJOUPBTPMVUJPOXJUIBLOPXOTUBCMFUFNQFSBUVSF*UJTSFDPNNFOEFEUIBUUXP
/*45USBDFBCMFUIFSNPNFUFSTCFVTFEUPNFBTVSFBOEWFSJGZUIFUFNQFSBUVSFPGUIFTPMVUJPO
8BJUGPSUIFUFNQFSBUVSFSFBEJOHTPGUIF"5$QSPCFBOEUIFSNPNFUFSTUPTUBCJMJ[F VTVBMMZUXPUPmWFNJOVUFT
1SFTT f3 (edit) to access the numeric entry screen and edit the temperature value.
a. Press , , or to highlight a number, decimal point or negative sign; press
f3 (enter) to select the highlighted item and repeat until the temperature value read by the
UIFSNPNFUFSTJTTIPXOPOUIFEJTQMBZ
b. Press f2 (done)
UPFYJUUIFOVNFSJDFOUSZTDSFFO
5IFNFUFSXJMMEJTQMBZUIFFOUFSFEUFNQFSBUVSFWBMVFPOUIF Reference Temp line, the original temperature
read by the ATC probe on the ATC MJOFBOEUIFUFNQFSBUVSFPGGTFUWBMVFUIBUXJMMCFBQQMJFEUPBMMGVUVSF
temperature readings on the Offset line. Press f2 (accept) UPQSPDFFEXJUIUIFEJTQMBZFEUFNQFSBUVSFEBUB
TBWFBOEFOEUIFDBMJCSBUJPOBOEFYQPSUUIFEBUBUPUIFDBMJCSBUJPOMPH
1SFTT
f1 (meas) proceed to the measurement mode or press f2 (print) to proceed to the measurement mode
BOEFYQPSUUIFEBUBUPBQSJOUFSPSDPNQVUFS