Thermo Scientific Orion 960 Titrator Addendum
Chapter
Miscellaneous Changes
• The unit lbs/gal in ABC calculation has been changed to lbs/cubic feet.
• System reset can be done by pressing PAUSE while powering up the
960. This must be done only if the system has been locked up by
power surge or other external factor. Keep in mind, the system reset
wipes out all saved methods and saved calibration parameters in the
960. Always keep hard copy printout of your methods in case you have
to do a system reset.
• The message of:
1: PRINTER
2: PC DATA COLLECT?
has replaced with:
ORION 960 CONNECTED TO A PRINTER?
• In the new accessory menu, if “1” is selected then the 960 printer
port can be used with the printer. If “2” is selected then the printer
port on the 960 can be used for data collection with the DataPLUS2
software. In revision 5.6 software, data and the messages in the 960
has been coded with a seven digit number so DataPLUS2 software can
identify the 960 parameters. The seven digit coded part of the data is
transparent to the user.
