Gently agitate aspirator
bottle. Loosen clamp
and cell suspension
will flow into the Cell
Factory. Chambers will
initially fill unevenly
due to a difference in
pressure.
9
10
When filling is
complete, allow
levels of liquid in
all chambers to
equalize through the
connecting channel.
The surface of all the
trays will be covered
by medium. Remove
the connector, replace
the white filter adaptor
cap, but leave the filter
on and incubate.
13
14
To empty the Cell
Factory place it above
aspirator bottle, in the
position shown, and
the liquid will run out.
Turn the Cell Factory
90º, so that filling inlet
is up. Medium will
be separated with
equal amounts in each
chamber.
11
12
Place the Cell Factory
in horizontal incubation
position.
Tilt the Cell Factory to
drain it completely.
15
16
To decontaminate the
Cell Factory after use
it is recommended to
autoclave: 60 min,
132°C.
© 2010 Thermo Fisher Scientific Inc. All Rights Reserved.
All trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.
MNLSPCF10INSTR 0210
47201 Ver. 6.0
Asia:
China Toll-free: 800-810-5118 or 400-650-5118; India: +91 22 6716 2200, India Toll-free: 1 800 22 8374; Japan: +81 3 3816 3355
Other Asian countries: 65 68729717
Europe:
Austria: +43 1 801 40 0; Belgium: +32 53 73 42 41; Denmark: +45 4631 2000; France: +33 2 2803 2180; Germany: +49 6184 90
6940, Germany Toll-free: 08001-536 376; Italy: +39 02 02 95059 or 434-254-375;
Netherlands: +31 76 571 4440; Nordic/Baltic countries: +358 9 329 100; Russia/CIS: +7 (812) 703 42 15;
Spain/Portugal: +34 93 223 09 18; Switzerland: +41 44 454 12 12; UK/Ireland: +44 870 609 9203
North America:
USA/1 585 586 8800; USA Toll-free: +1 800 625 4327
South America:
USA sales support: +1 585 899 7198
Countries not listed:
+49 6184 90 6940 or +33 2 2803 2180
www.thermoscientific.com/bioproduction
Thermo Scientific Nunc Cell Factory
Instructions for use: CF1 CF4, CF10 and CF40
