3
Applications
Measure Custom
Thermo Scientific
NanoDrop One
C
with NanoDropQC Software User Guide
29
Measure Custom
Measure using a Custom Method
Use the Custom application to run a user-defined method created using the NanoDrop QC
software running on a personal computer. For more information, see
.
To load a custom method
Custom methods can only be created on a personal computer running the NanoDrop QC
software. If you want to run a custom method and store the measurement results on the
instrument, the method must also reside on the instrument. (This is the only way to run a
custom method if your instrument is not connected to the computer with an Ethernet cable.)
Load custom methods onto the instrument
1.
from the personal computer and copy the method file to the root of a
portable USB device such as a memory stick.
Method files have a “.method” filename extension.
2. Connect the USB device to one of the
on the instrument.
3. From the Home screen, select
Custom
Method
.
4. Use the list box at the top of the screen to indicate the USB port used.
Runs a custom measurement method created
using NanoDrop QC software.
Note
Custom methods downloaded from the NanoDrop One website have a .zip
filename extension and must be extracted using a third-party file decompression
program before the software will recognize them as custom methods.
