Thermo Scientific LCQ Fleet, Getting Started Manual, Page: 48 / 74

5
Connecting a Thermo Scientific LC System
Contact Closure Cables
34 LTQ Series Getting Connected Guide Thermo Scientific
Contact Closure Cables
To make contact closure with a Thermo Scientific LC /MS system, you must have these
contact closure cables:
• The LC/MS interconnect cable shown in Figure 20 .
• The LTQ/LXQ interconnect adapter cable shown in Figure 21
If you have a Surveyor LC system with a Surveyor MS Pump or Surveyor MS Pump Plus, you
must also have the MS pump adapter cable shown in
Figure 22 .
Figure 20. LC/MS interconnect cable with seven combicom connectors (P/N 60053-63034)
Figure 21. LTQ/LXQ interconnect adapter cable (P/N 60053-63037)
Figure 22. MS pump adapter cable (P/N 60053-63034) for the Surveyor MS Pump or Surveyor MS Pump Plus
DETECT
O
R
DETECT
O
R
DETECT
O
R
PUMP
PUMP
A/S
M/S
RED
BLACK
70 inches
(178 cm)
8-pin connector
(connects to the LC/MS interconnect cable connector labeled M/S)
6-pin connector
(plugs into the LTQ Series MS detector)
60053-63038
7 inches
(18 cm)
Female end Male end