Thermo Scientific Invitrogen PowerEase Touch PS0350 User Manual Download Page 36

Page: 36 / 38

Documentation and support

Customer and technical support

Visit

thermofisher.com/support

for the latest service and support information.

• Worldwide contact telephone numbers
• Product support information

– Product FAQs
– Software, patches, and updates
– Training for many applications and instruments

• Order and web support
• Product documentation

– User guides, manuals, and protocols
– Certificates of Analysis
– Safety Data Sheets (SDSs; also known as MSDSs)

Note:

For SDSs for reagents and chemicals from other manufacturers,

contact the manufacturer.

Limited product warranty

Life Technologies Corporation and/or its affiliate(s) warrant their products as
set forth in the Life Technologies' General Terms and Conditions of Sale
at

www.thermofisher.com/us/en/home/global/terms-and-conditions.html

. If you

have any questions, please contact Life Technologies at

www.thermofisher.com/

support

PowerEase

™

Touch 350W Power Supply User Guide

Summary of Contents for Invitrogen PowerEase Touch PS0350







































Search results

Summary of Contents for Invitrogen PowerEase Touch PS0350

Reviews:

Related manuals for Invitrogen PowerEase Touch PS0350

Brands by name

Popular brands

Thermo Scientific Invitrogen PowerEase Touch PS0350, User Manual

Search results

Summary of Contents for Invitrogen PowerEase Touch PS0350

Reviews:

Related manuals for Invitrogen PowerEase Touch PS0350

Brands by name

Popular brands