2
Installation
Moving the Unit
Thermo Scientific
Medilite Microcentrifuges
2-3
Moving the Unit
To move the unit to a new location:
1. Check that the new site meets the criterias described in
“Prepare the Installation Site”
on
page 2-2
before moving the unit.
2. Before moving, unplug the centrifuge and remove all accessories and the rotor.
3. Position a flat object, such as a tongue depressor, near a suction cup at the bottom of the unit.
4. Lift up an edge of the cup, and insert the flat object far enough to break the vacuum suction seal.
5. When all four suction cups are disengaged, lift the unit from the work surface.
6. When the unit is in its new location, ensure that the suction cups adhere correctly to the work
surface.
WARNING
ELECTRICAL HAZARD!
Do not remove the grounding pin from the centrifuge power cord. Do not use the bare
wired power cord to attach a power plug that does not have a grounding pin. The power
cord provided with the unit is correctly rated for the highest current demand. This power
cord should not be interchanged with cords from equipment with lower current demand.
Exchange of power cords between equipment may create a fire hazard.
WARNING
Use caution when moving to avoid any injury
Summary of Contents for IM448
Page 29: ......
