Thermo Scientific Heratherm IMC 18, Operating Instructions Manual

Page: 14 / 40

Installation
Room ventilation
3-2 Heratherm IMC 18 Thermo Scientific
Room ventilation
Heat dissipating from the device during continuous operation may cause a change in the room
climate.
Therefore, the device must only be installed in rooms with sufficient ventilation.
Do not install the incubator in room recesses without ventilation.
When several devices are to be placed in the same room, additional ventilation may have to be
provided as necessary.
The room ventilation is to be of a technical form which is designed in accordance with the thermal
input.
Installation
When installing the device, make sure that the installation and supply connections remain freely
accessible. The minimum wall clearance is 5 cm / 2 in on the sides and back. No other devices are to
be placed on the device.
Transport
The device is not to be lifted by the door or attachments when being transported.
The cooling fan on the back of the device is not to be covered.
It is not to suck-in any loose items (e.g. paper).