Thermo Scientific Heracell Vios 160i CR, Operating Instructions Manual

Page: 110 / 216

6
Handling and Control
User Configuration
6-24
Heracell Vios 160i / 250i CR
Thermo Scientific
Figure 6-26. Interface USB Menu
3. Select the option Interface USB ( Figure 6-26 ).
• The input dialog shown in Figure 6-27 is displayed.
Figure 6-27. USB Interface Baud Rate Setting
4. Press the + or key to set the Baud rate of the USB interface ( Figure 6-27 ).
• To increase the baud rate: Press the + key.
• To reduce the baud rate: Press the - key.
5. The value change appears in the display. The New message indicates that the selection has been
changed, but not saved yet.
6. To accept and save the change:
• Press the Enter key.
• The display returns to Interface USB selection menu.
7. To activate the new settings:
• Browse back to the main menu.
• Wait for approx. 10 seconds and perform a reset by switching the device off and on using the
power switch.