Thermo Scientific G100 Series, Operating Manual

Page: 37 / 60

Problem Solving
Self-test Warning Messages
Thermo Scientific G100 Range CO
2
Analyser
8-3
Change Battery The Lithium Ion battery has exceeded its recommended
life-time or number of charge cycles and should be changed.
The instrument will need to be returned to the manufacturer
for service.
User Cal. Due It has been over a month since the instrument was last user
calibrated. For optimal performance and accuracy it is rec-
ommended that the instrument is user calibrated each time it
is used.
Invalid Time The instrument has an invalid time. This is most likely to
occur after a reset. The correct time should be entered using
the set ‘Time & Date’ option via the ‘Utilities’ menu.
Invalid Date The instrument has an invalid date. This is most likely to
occur after a reset. The correct date should be entered using
the set ‘Time & Date’ option via the ‘Utilities’ menu.
Baro. Fault The instrument has detected a fault with the barometric sen-
sor or its calibration. This will have an effect on the accu-
racy of the readings as they are pressure compensated. The
instrument will need to be returned to the manufacturer for
service.
Note *Certain configuration problems can be corrected remotely. Using the G100 Range
- Download Software, it is possible to export the current configuration and e-mail it to the
manufacturer’s Technical Support or Service Department. Depending on the type of error
it may be possible to correct the configuration file and import it back into the instrument.
Warning Description