Thermo Scientific FOCUS GC, Instruction Manual

Page: 322 / 356

Chapter 16
LAN Option Set-up
Introduction
322 Instruction Manual
Introduction
The FOCUS GC LAN version is basically an instrument equipped with a CPU
featuring LAN (Local Area Network) capabilities. The FOCUS GC LAN is easily
recognizable by the presence on the rear panel of a RJ45 connector, 2 LEDs for
LAN activity and a reset button.
Figure 1-1. FOCUS GC Rear Panel
IP Address and LAN Communication Port
The FOCUS GC LAN is shipped with a default IP address.
To change the default values, contact your LAN administrator and ask for the IP
address to be assigned, the netmask, and eventually the port.
• The IP address is a 3 digits x 4 fields number given by the network
administrator e.g. 192.168.127.10
• The netmask is a 3 digits x 4 fields number given by the network
administrator e.g. 255.255.255.0
• The port is a 4 digits number given by the network administrator e.g. 4001
(4001 is usually the CPU/LAN default)
The default IP address of the FOCUS GC LAN CPU is 192.168.127.254.
1. RJ45 Connector 2. LED marked 100 Mbps
3. LED marked 10 Mbps 4. Reset button
O O
II
P
O
W
E
R
ON
OFF
LAN
1
2
3
4