EVOS
™
M5000 Imaging System User Guide
61
9.
Adjust instrument settings
Overview
Settings tab
The
Settings tab
allows you to assign objectives to the objective turret, to calibrate
objective magnification, to set image and general instrument options, add and
remove light cubes, and to connect to a Wi-Fi network and to map network drives.
•
To open the settings tab, click the
Settings
button.
•
To expand or collapse the any of the controls, click the corresponding arrow.
Objective Selection and Calibration:
Set up and calibrate objectives and assign objective
profiles (page 62).
Visuals:
Adjust White Balance for the color camera (page 64) and set saturated pixel
options (page 65)
General:
Set general instrument options, such as savings options for TIFF files, focus
wheel action, Saved Settings options, and Capture All Channels options (page 66)
Filter Cubes:
Add or remove EVOS
™
LED light cubes and to assign pseudocolors for
installed light cubes (page 74).
Network:
Configure network settings (page 67)
Service:
Copy error logs, set date and time, and update software and firmware from
the cloud or the USB flash drive (page 70).
Incubator
: Configure the gas inputs, calibrate the oxygen sensor, and set the
temperature offsets for the EVOS
™
Onstage Incubator (page 91).
The Incubator panel is only visible when an EVOS
™
Onstage Incubator is connected to
your EVOS
™
M5000 Imaging System.
