Thermo Scientific Evolution One Series User Manual Download

Page: 38 / 42

Evolution One Series Spectrophotometers

Maintenance

Evolution One Series Spectrophotometer User Guide

Thermo Scientific

5. Double-click the Insight Pro desktop icon to start the software.

Maintenance

Turning off a Computer Control Instrument

To turn off the instrument

1. Close Insight Pro software.

2. If necessary, turn off the spectrophotometer main power switch (on the back panel).

Maintenance

Maintenance

Routine Maintenance

Clean the instrument regularly using approved methods (wipe off spilled
chemicals immediately).

Related Topics

Maintenance

Tip

For routine use, leave the power switch on the instrument back panel in the On

position and turn on/off the spectrophotometer main power switch.

Contents

•

Routine Maintenance

•

Maintenance

•

Removing and Installing the Detector Module

Summary of Contents for Evolution One Series











































Search results

Summary of Contents for Evolution One Series

Reviews:

Related manuals for Evolution One Series

Brands by name

Popular brands

Thermo Scientific Evolution One Series, User Manual

Search results

Summary of Contents for Evolution One Series

Reviews:

Related manuals for Evolution One Series

Brands by name

Popular brands